Young Korean Researchers Agora
(Oral/Poster Integrated Session)
(Oral/Poster Integrated Session)
Student Research & Design Exchange (SRD)
SRD-1
[P00030] Investigation of Tribological Behavior of Metallic Thin Coating by Molecular Dynamics Simulation
Kuk-Jin Seo, Dae-Eun Kim (Yonsei Univ.)
SRD-2
[P00061] Analysis of Spherical Tip Size Effect on Brittle-to-Ductile Transition in Brittle Materials
Kwangmin Lee, Karuppasamy Pandian Marimuthu, Hyungyil Lee (Sogang Univ.)
SRD-3
[P00081] Effect of Substrate on the Tribological Characteristics of Graphene Films
Youjin Min, Kyeong-Hee Kang, Dae-Eun Kim (Yonsei Univ.)
SRD-4
[P00109] Development of Piston Ring Friction Measurement System
Hyunjung Oh (Seoul National Univ.), Kyoung-Pyo Ha (Hyundai Motor Group), Kyoungdoug Min (Seoul National Univ.)
SRD-5
[P00114] Effect of Surface Treatment on the Property of Thin Film Coating on Polymer
Jiwon Choi, Yuzhen Liu, Dae-Eun Kim (Yonsei Univ.)
SRD-6
[P00154] Effect of Adhesion on a Beam with Surface Effects Lifted from the Ground
Kyeongmin Kim, Yong Hoon Jang (Yonsei Univ.)
SRD-7
[P00162] Investigation of Tribological Characteristics of Thin Films on Anodic Aluminum Oxide
Seong-Yun Jung, Won-Bin Kang, Hyun-Joon Kim (Kyungpook National Univ.)
SRD-8
[P00167] Lubrication Characteristics of Bio-degradable Lubricant with respect to Various Experimental Conditions
Hee-Young Jung, Won-Bin Kang, Hyun-Joon Kim (Kyungpook National Univ.)
SRD-9
[P00190] A Study of Elastohydrodynamic Lubrication for the Water-lubricated Composite Journal Bearing
Wonvin Kim, Seong Su Kim (KAIST)
SRD-10
[P00196] Effect of Inner and Outer Conditioners on Pad Wear Profile in Two-Zone Conditioning System
Jungyu Son, Seonghyun Park, Hyunseop Lee (Tongmyong Univ.)
SRD-11
[P00201] Investigation of Tribological Properties of DLC Coatings with respect to Engine Oil Lubricant
Tae-Hyeong Kim (Yonsei Univ.), Jihwan Yoon, Gwangyul Ko, Jongseong Kim (Dongwoo HST Co.), Dae-Eun Kim (Yonsei Univ.)
SRD-12
[P00206] Identification of Micro-particle Generation Mechanisms through Friction Tests of Brake Pad Specimens on a Laboratory Size
Jaesang Yoo, Youngze Lee (SungKyunKwan Univ.)
SRD-13
[P00234] Effects of Al-Si Coating Thickness on Friction and Wear in Hot Press Forming
Min Ki Ji (Incheon National Univ.), Hyunsung Son, Jinkeun Oh, Seongwoo Kim (POSCO), Tea-Sung Jun (Incheon National Univ.)
SRD-14
[P00237] Analysis of Reciprocating Compressors Considering Multibody Dynamic Characteristics
Sangjoon Park (Yeungnam Univ.), Sangmin Kim, Younghwan Kim (LG Electronics Co.), Sang-Shin Park (Yeungnam Univ.)
SRD-15
[P00239] Optimum Clearance of Hydrodynamic Surfaces in a High Pressure Injector
Daewon Ryu, Sang-Shin Park (Yeungnam Univ.), Bongwoo Ryu (HYUNDAI KEFICO)
SRD-16
[P00241] Wettability Characteristics of Aluminum Surface with Curved Grooves
Mu Yeon Jang, Tae Wan Kim (Pukyong National Univ.)
SRD-17
[P00244] Optimization of Ultrasonic Resonant Frequency According to Micro-Leakage Location and Leak Rate in High Pressure Chamber
Wonjun Seo, Seongjin Son, Seokyeon Im (Tongmyong Univ.)
SRD-18
[P00246] Adhesion Characteristics of Polymer Stamp for Micro-Device Transfer Process
Min-Ah Yoon, Chan Kim, Jae-Hyun Kim (Univ. of Science and Technology, UST), Kwang-Seop Kim (Korea Institute of Machinery and Materials, KIMM)
SRD-19
[P00248] Enhancement of Surface Reliability of Marine Engine Components Using DLC Film
Hyeseon Park (Univ. of Ulsan), Hyang Lee, Sang Don Lee (Hyundai Heavy Industries Co., Ltd.), Koo-Hyun Chung (Univ. of Ulsan)
SRD-20
[P00249] A Study on Nonlinear Responses and Bifurcations of an Eccentric Rotor with Automatic Multi-Ball Balancer System
Sang-Kyu An, Sitae Kim (Korea Air Force Academy), Junho Suh (Pusan National Univ.)
SRD-21
[P00252] Measurements of Drag Torque and Friction Coefficient of Gas Foil Thrust Bearings
Sung Ho Hwang, Tae Ho Kim (Kookmin Univ.)
SRD-22
[P00259] Effects of Ultrasonic Nanocrystal Surface Modification on Friction and Wear Behavior of a Ball Screw Made of AISI4150H Steel
Jun-Suek Ro, Young-Sik Pyun, Auezhan Amanov (Sun Moon Univ.)
SRD-23
[P00301] Tribological Characteristics of ABS-Like Resin according to Viscosity of Lubricant and Load Conditions
Seonghyun Park, Jungyu Son, Seongwoong Woo, Euijin Ryu, Hyunseop Lee (Tongmyong Univ.)
SRD-24
[P00313] Cost-Effective Fabrication of Durable Replication Stamp Based on Nanoparticle Reinforced UV-Curable Polymer
Selim Park, Jingyu Kim, Wookbae Kim (Korea Polytechnic Univ.)
SRD-25
[P00314] Wettability Control of Aluminum Alloy Using Industrial Anodizing Conditions
Jingyu Kim (Korea Polytechnic Univ.), Jae Dong Eo (S&D ENG Co., Ltd), Selim Park, Wookbae Kim (Korea Polytechnic Univ.)
SRD-26
[P00318] Development of Machine Condition Monitoring System with Oil Sensors
Eun-Hyo Seon, Sung-Ho Hong (Dongguk Univ.)
SRD-27
[P00171] Nanoscale Frictional Effect of Water Layers Intercalated Between Exfoliated MoS2 and Mica
Dooho Lee, Hyunhwa Lee, Jeong Young Park (KAIST)
Young Professionals Festa (YPF)
 |
YPF-1 |
 |
YPF-2 [P00223] Estimation of Real Contact Spot Distribution Using Deep Learning Ilkwang Jang, Yong Hoon Jang (Yonsei Univ.) |
 |
YPF-3 [P00243] Damage Mechanisms of CVD Graphene in Dry Transfer Process Chan Kim, Min-Ah Yoon (Univ. of Science and Technology, UST), Bongkyun Jang, Jae-Hyun Kim (Korea Institute of Machinery and Materials, KIMM), Hyun-Jun Jung (Center for Advanced Meta-Materials, CAMM), Hak-Joo Lee, Kwang-Seop Kim (Korea Institute of Machinery and Materials, KIMM) |
 |
YPF-4 [P00264] A Numerical Study on the Oxidizer Pump Rear Floating Ring Seal Performance for 7tonf Class Turbopump Joonhwan Bae, Hyunduck Kwak, Sungjae Heo, Soonsam Hong, Changho Choi (Korea Aerospace Research Institute) |
 |
YPF-5 [P00192] Surface Termination-Dependent Nanotribological Properties of Single-Crystal MAPbBr3 Surfaces Joong Il Jake Choi (Institute for Basic Science, IBS), Muhammad Ejaz Khan (KAIST), Zafer Hawash (OIST), Hyunhwa Lee (KAIST), Luis Katsuya Ono, Yabing Qi (OIST), Yong-Hoon Kim, Jeong Young Park (KAIST) |
